Register  |  Log In
 Home|Products||Configure|Support|FAQ|About Us|Contact UsDistributors  

Command Tower Accessories


Onyx Industries offers a variety of mounting and wiring accessories. Our accessories continue our belief in putting 'metal where metal belongs'. Mounting poles and brackets are made from steel and aluminum, with attractive finishes. Brackets are available for wall mount and base mount, with some brackets made specifically for mounting to popular aluminum extrusions (80-20 10 and 15 series or equal).

* M12 Quick Disconnect Connectors fit through all poles and brackets unless otherwise noted.

Note that you must be logged in to see the prices

  accessories  
Panel (Direct) Mounting
FN12-14NPS   Part Number: FN12-14NPSM
Flange nut for panel mounting
1/2-14NPSM thread with hex flange

Cut 7/8 inch hole in panel, feed through
and thread into base of Command Tower

Nickel plated steel

   




Jam Nut   Part Number: JN12-14NPSM

Jam Nut Kit for use with Onyx Industries Poles. Allows poles to be jam-nut mounted to enclosures, machine skins, U-Channel Brackets or L-Brackets. Includes 2 Jam Nuts and 2 Washers. Jam Nuts are 1.125 Inch Hex Bar 6061 Aluminum, 0.215 inches high, 1/2-14 NPSM thread, Plated Finish.
   



Mounting Brackets
UCB   Part Number: UCB

U-channel bracket for wall mounting with a
pole (order pole separately)

Includes jam nuts

The rod guide supports the pole in two places
providing the most rigid wall mount installation

Cold rolled steel, nickel plated
   




LB   Part Number: LB

L-bracket for wall mounting with a pole
(order pole separately)

Includes jam nuts

Cold rolled steel, nickel plated

   




BMF35x15   Part Number: BMF35x15

Base mount flange for use with poles (order pole separately)

1/2-14NPSM thread, 4 gussets, 4 mounting
holes for 1/4-20 or 5mm fasteners

Through-hole in base for cable exit

M12 quick disconnect connectors fit through
hole in base

Solid die cast aluminum, nickel plated

* M22x1.5 thread available (contact factory)
   




WECBMF35x15   Part Number: WECBMF35x15

Includes both the base mount flange and Delrin spacer
allowing cables to exit out the side (adjustable at 45
degree increments). For use with a pole (order pole separately)

1/2-14NPSM thread, 4 gussets, 4 mounting
holes for 1/4-20 or 5mm fasteners

M12 quick disconnect connectors fit through assembly

Solid die cast aluminum, nickel plated. Spacer is
Delrin (other materials upon request)

* M22x1.5 thread available (contact factory)
   




10HS   Part Number: 10HS

Horizontal side mounting base for 80-20 Series 10
or equal extrusion

Threaded for 1/2-14NPSM for use with poles
(order pole separately)

Cable exits out the bottom, M12 quick disconnect
connector fits through the base

Solid aluminum, nickel plated
   




10HV   Part Number: 10HV

Horizontal vertical mounting base for 80-20
series 10 or equal extrusion

Threaded for 1/2-14NPSM for use with poles
(order pole separately)

Cable exits out the bottom and out the side
of any of 4 side slots

M12 quick disconnect connector fits through the base

Solid aluminum, nickel plated
   




10VS   Part Number: 10VS

Horizontal vertical mounting base for 80-20
series 10 or equal extrusion

Threaded for 1/2-14NPSM for use with poles
(order pole separately)

Cable exits out the bottom

M12 quick disconnect connector fits through the base

Solid aluminum, nickel plated
   




15HS   Part Number: 15HS

Horizontal vertical mounting base for 80-20
series 15 or equal extrusion

Threaded for 1/2-14NPSM for use with poles
(order pole separately)

Cable exits out the bottom

M12 quick disconnect connector fits through the base

Solid aluminum, nickel plated
   




15HV   Part Number: 15HV

Horizontal vertical mounting base for 80-20
series 15 or equal extrusion

Threaded for 1/2-14NPSM for use with poles
(order pole separately)

Cable exits out the bottom and out the side
of any of 4 side slots

M12 quick disconnect connector fits through the base

Solid aluminum, nickel plated
   




15VS   Part Number: 15VS

Horizontal vertical mounting base for 80-20
series 15 or equal extrusion

Threaded for 1/2-14NPSM for use with poles
(order pole separately)

Cable exits out the bottom

M12 quick disconnect connector fits through the base

Solid aluminum, nickel plated
   



Mounting Poles (can be ordered as part of the Command Tower or separately here)
Poles
  Part Number: P6
6 inch long pole, 1/2-14NPSM thread on both ends
Nickel plated steel
   



  Part Number: P12
12 inch long pole, 1/2-14NPSM thread on both ends
Nickel plated steel
   



  Part Number: P18
18 inch long pole, 1/2-14NPSM thread on both ends
Nickel plated steel
   



  Part Number: P24
24 inch long pole, 1/2-14NPSM thread on both ends
Nickel plated steel
   



  Part Number: P36
36 inch long pole, 1/2-14NPSM thread on both ends
Nickel plated steel
   



  Part Number: P48
48 inch long pole, 1/2-14NPSM thread on both ends
Nickel plated steel
   



  Part Number: P72
72 inch long pole, 1/2-14NPSM thread on both ends
Nickel plated steel
   



* Nickel plated 6061 aluminum poles also available, non-standard lengths may be provided in aluminum.
Mating Cables for Units with M12 Connectors


M12 Connector
  Part Number: M12-C1-5
2m long
   



  Part Number: M12-C1-8
2m long
   



  Part Number: M12-C2-5
4m long
   



  Part Number: M12-C2-8
4m long
   



  Part Number: M12-C3-5
10m long
   



  Part Number: M12-C3-8
10m long
   



* All units with 3 illuminated segments (including illuminated cap) or less use a 5 pin QD cable. Units with more use an 8 pin QD cable.
* Contact the factory or your distributor for customer specific connectors.
* M12 connectors from Onyx Industries fit through all poles and mounting adapters.

Onyx Industries    PO Box #516, 2347 Commerce Drive, Hastings, MN 55033
Phone: 651.204.0797    Fax: 651.304.1224    Email: Info@Onyx-Industries.com